Care Guide - Installing Replacement Snaps

Our STS Ranchwear outerwear with snap closures make getting out the door quick and easy. That said, sometimes life happens and a snap gets lost. While the rogue snap enjoys life on the outside, follow along to replace your snap at home without needing any special tools!*

First, get organized. Have your snaps and tools ready!

What you’ll need:

• Extra replacement snap(s)
  • An extra STS Branded snap comes with your item. You will find it attached to the product’s tag by the collar.
• Nail
  • The head of the nail should fit within the circumference of the inside of the snap once assembled
• Hammer 

Next, you’ll need to know the different parts that make up the snap to install it!

The picture below shows the different parts of the snaps and their names. Please refer to this diagram when moving forward with at home installation!

Match up the sides of the snap before you get started. The post should be on the bottom side of the fabric, and the stud should be on the top where it will be attached to the socket.

Now it’s time to replace your snap!

Installing Replacement Snaps Steps

1.  Position the two parts of the cap and socket snap on either side of the fabric.

• Insert the cap through the front of the fabric.
• Place the socket onto the cap post on the inside of the fabric.

2.  Once the snap is lined up, keep a steady hand on the socket to ensure nothing shifts.

• Having a soft surface below the cap makes sure the STS branded snap does not get scuffed. You can easily fold the item on top of itself. 

3.  Line up the nail head inside of the socket and give it a few taps with the hammer until the socket is securely locked onto the cap.

• Less is more, so take this step slowly.
• Gently but firmly hit the base of the nail. Periodically check to see if your cap has been formed to the socket. Once it has, your snap will stay.

4.  Repeat the above steps for the stud and post snap.

• Make sure to hammer the nail on the top side of the fabric with the stud, not the bottom of the post side.

5.  Snap the two sides together to ensure they lock properly.

Your item is now ready to brave the elements yet again. We hope this guide was helpful! 

If you have any other questions, please contact us. Our customer service representatives will respond to your inquiry within 24 - 48 hours (Monday - Friday).

*Please note, we are not responsible for any damage during the snap installation process. Repair at your own risk. If in doubt, have a professional (tailor or dry cleaner) in your area replace the button for you.

Also in Cleaning and Care Guides